EPSG:8059 — GDA2020 / SA Lambert

Projekte · Australia - SA

Tanım Formatları

OGC WKT

PROJCS[
    "GDA2020 / SA Lambert",
    GEOGCS[
        "GDA2020",
        DATUM[
            "Geocentric_Datum_of_Australia_2020",
            SPHEROID["GRS 1980",6378137,298.257222101],
            TOWGS84[0,0,0,0,0,0,0]
        ],
        PRIMEM["Greenwich",0,AUTHORITY["EPSG","8901"]],
        UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],
        AUTHORITY["EPSG","7844"]
    ],
    PROJECTION["Lambert_Conformal_Conic_2SP"],
    PARAMETER["latitude_of_origin",-32],
    PARAMETER["central_meridian",135],
    PARAMETER["standard_parallel_1",-28],
    PARAMETER["standard_parallel_2",-36],
    PARAMETER["false_easting",1000000],
    PARAMETER["false_northing",2000000],
    UNIT["metre",1,AUTHORITY["EPSG","9001"]],
    AXIS["Easting",EAST],
    AXIS["Northing",NORTH],
    AUTHORITY["EPSG","8059"]
]

WKT2

PROJCRS[
    "GDA2020 / SA Lambert",
    BASEGEOGCRS[
        "GDA2020",
        DATUM[
            "Geocentric Datum of Australia 2020",
            ELLIPSOID[
                "GRS 1980",
                6378137,
                298.257222101,
                LENGTHUNIT["metre",1,ID["EPSG",9001]],
                ID["EPSG",7019]
            ],
            ID["EPSG",1168]
        ],
        ID["EPSG",7844]
    ],
    CONVERSION[
        "South Australia Lambert",
        METHOD["Lambert Conic Conformal (2SP)",ID["EPSG",9802]],
        PARAMETER[
            "Latitude of false origin",
            -32,
            ANGLEUNIT["degree",0.0174532925199433,ID["EPSG",9102]],
            ID["EPSG",8821]
        ],
        PARAMETER[
            "Longitude of false origin",
            135,
            ANGLEUNIT["degree",0.0174532925199433,ID["EPSG",9102]],
            ID["EPSG",8822]
        ],
        PARAMETER[
            "Latitude of 1st standard parallel",
            -28,
            ANGLEUNIT["degree",0.0174532925199433,ID["EPSG",9102]],
            ID["EPSG",8823]
        ],
        PARAMETER[
            "Latitude of 2nd standard parallel",
            -36,
            ANGLEUNIT["degree",0.0174532925199433,ID["EPSG",9102]],
            ID["EPSG",8824]
        ],
        PARAMETER[
            "Easting at false origin",
            1000000,
            LENGTHUNIT["metre",1,ID["EPSG",9001]],
            ID["EPSG",8826]
        ],
        PARAMETER[
            "Northing at false origin",
            2000000,
            LENGTHUNIT["metre",1,ID["EPSG",9001]],
            ID["EPSG",8827]
        ],
        ID["EPSG",17359]
    ],
    CS[Cartesian,2,ID["EPSG",4400]],
    AXIS["Easting (E)",east],
    AXIS["Northing (N)",north],
    LENGTHUNIT["metre",1,ID["EPSG",9001]],
    ID["EPSG",8059]
]

PROJ.4

+proj=lcc +lat_0=-32 +lon_0=135 +lat_1=-28 +lat_2=-36 +x_0=1000000 +y_0=2000000 +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs +type=crs

Proj4js

Proj4js'a nasıl projeksiyon eklerim? →

proj4.defs("EPSG:8059", "+proj=lcc +lat_0=-32 +lon_0=135 +lat_1=-28 +lat_2=-36 +x_0=1000000 +y_0=2000000 +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs +type=crs");

JSON

{
  "type": "CoordinateReferenceSystem",
  "code": 8059,
  "name": "GDA2020 / SA Lambert",
  "kind": "projected",
  "area": "Australia - SA",
  "unit": "metre",
  "bbox": [
    -38.13,
    128.99,
    -25.99,
    141.01
  ],
  "proj4": "+proj=lcc +lat_0=-32 +lon_0=135 +lat_1=-28 +lat_2=-36 +x_0=1000000 +y_0=2000000 +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs +type=crs"
}

PostGIS

PostGIS'a nasıl projeksiyon eklerim? →

INSERT INTO spatial_ref_sys (srid, auth_name, auth_srid, proj4text, srtext)
VALUES (8059, 'EPSG', 8059, '+proj=lcc +lat_0=-32 +lon_0=135 +lat_1=-28 +lat_2=-36 +x_0=1000000 +y_0=2000000 +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs +type=crs', 'PROJCS["GDA2020 / SA Lambert",GEOGCS["GDA2020",DATUM["Geocentric_Datum_of_Australia_2020",SPHEROID["GRS 1980",6378137,298.257222101],TOWGS84[0,0,0,0,0,0,0]],PRIMEM["Greenwich",0,AUTHORITY["EPSG","8901"]],UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","7844"]],PROJECTION["Lambert_Conformal_Conic_2SP"],PARAMETER["latitude_of_origin",-32],PARAMETER["central_meridian",135],PARAMETER["standard_parallel_1",-28],PARAMETER["standard_parallel_2",-36],PARAMETER["false_easting",1000000],PARAMETER["false_northing",2000000],UNIT["metre",1,AUTHORITY["EPSG","9001"]],AXIS["Easting",EAST],AXIS["Northing",NORTH],AUTHORITY["EPSG","8059"]]');

MapServer

MapServer'a nasıl projeksiyon eklerim? →

PROJECTION
  "+proj=lcc"
  "+lat_0=-32"
  "+lon_0=135"
  "+lat_1=-28"
  "+lat_2=-36"
  "+x_0=1000000"
  "+y_0=2000000"
  "+ellps=GRS80"
  "+towgs84=0,0,0,0,0,0,0"
  "+units=m"
  "+no_defs"
  "+type=crs"
END

GeoServer

GeoServer'a nasıl projeksiyon eklerim? →

8059=PROJCS["GDA2020 / SA Lambert",GEOGCS["GDA2020",DATUM["Geocentric_Datum_of_Australia_2020",SPHEROID["GRS 1980",6378137,298.257222101],TOWGS84[0,0,0,0,0,0,0]],PRIMEM["Greenwich",0,AUTHORITY["EPSG","8901"]],UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","7844"]],PROJECTION["Lambert_Conformal_Conic_2SP"],PARAMETER["latitude_of_origin",-32],PARAMETER["central_meridian",135],PARAMETER["standard_parallel_1",-28],PARAMETER["standard_parallel_2",-36],PARAMETER["false_easting",1000000],PARAMETER["false_northing",2000000],UNIT["metre",1,AUTHORITY["EPSG","9001"]],AXIS["Easting",EAST],AXIS["Northing",NORTH],AUTHORITY["EPSG","8059"]]

İlişkili Koordinat Sistemleri

Mevcut Dönüşümler (9)

Dönüşümler temel CRS'den alınmıştır: EPSG:7844 (GDA2020)

Dönüşüm	Kaynak → Hedef	Hassasiyet (m)
GDA94 to GDA2020 (1)	4283 → 7844	0.01
AGD66 to GDA2020 (1)	4202 → 7844	0.05
GDA94 to GDA2020 (4)	4283 → 7844	0.05
GDA94 to GDA2020 (5)	4283 → 7844	0.05
GDA94 to GDA2020 (3)	4283 → 7844	0.05
GDA94 to GDA2020 (2)	4283 → 7844	0.05
GDA2020 to WGS 84 (2)	7844 → 4326	3
WGS 84 to GDA2020 (3)	4326 → 7844	3
WGS 84 to GDA2020 (4)	4326 → 7844	3

Geocentric Datum of Australia 2020 Kullanan Diğer CRS (42)

Sıkça Sorulan Sorular

EPSG:8059 projeksiyonunu GeoServer'a nasıl eklerim?

Aşağıdaki tanımı GeoServer yapılandırma dosyanıza ekleyin:

8059=PROJCS["GDA2020 / SA Lambert",GEOGCS["GDA2020",DATUM["Geocentric_Datum_of_Australia_2020",SPHEROID["GRS 1980",6378137,298.257222101],TOWGS84[0,0,0,0,0,0,0]],PRIMEM["Greenwich",0,AUTHORITY["EPSG","8901"]],UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","7844"]],PROJECTION["Lambert_Conformal_Conic_2SP"],PARAMETER["latitude_of_origin",-32],PARAMETER["central_meridian",135],PARAMETER["standard_parallel_1",-28],PARAMETER["standard_parallel_2",-36],PARAMETER["false_easting",1000000],PARAMETER["false_northing",2000000],UNIT["metre",1,AUTHORITY["EPSG","9001"]],AXIS["Easting",EAST],AXIS["Northing",NORTH],AUTHORITY["EPSG","8059"]]

GeoServer rehberinin tamamını okuyun →

EPSG:8059 projeksiyonunu PostGIS'e nasıl eklerim?

Aşağıdaki tanımı PostGIS yapılandırma dosyanıza ekleyin:

INSERT INTO spatial_ref_sys (srid, auth_name, auth_srid, proj4text, srtext)
VALUES (8059, 'EPSG', 8059, '+proj=lcc +lat_0=-32 +lon_0=135 +lat_1=-28 +lat_2=-36 +x_0=1000000 +y_0=2000000 +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs +type=crs', 'PROJCS["GDA2020 / SA Lambert",GEOGCS["GDA2020",DATUM["Geocentric_Datum_of_Australia_2020",SPHEROID["GRS 1980",6378137,298.257222101],TOWGS84[0,0,0,0,0,0,0]],PRIMEM["Greenwich",0,AUTHORITY["EPSG","8901"]],UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","7844"]],PROJECTION["Lambert_Conformal_Conic_2SP"],PARAMETER["latitude_of_origin",-32],PARAMETER["central_meridian",135],PARAMETER["standard_parallel_1",-28],PARAMETER["standard_parallel_2",-36],PARAMETER["false_easting",1000000],PARAMETER["false_northing",2000000],UNIT["metre",1,AUTHORITY["EPSG","9001"]],AXIS["Easting",EAST],AXIS["Northing",NORTH],AUTHORITY["EPSG","8059"]]');

PostGIS rehberinin tamamını okuyun →

EPSG:8059 projeksiyonunu MapServer'da nasıl kullanırım?

Aşağıdaki tanımı MapServer yapılandırma dosyanıza ekleyin:

PROJECTION
  "+proj=lcc"
  "+lat_0=-32"
  "+lon_0=135"
  "+lat_1=-28"
  "+lat_2=-36"
  "+x_0=1000000"
  "+y_0=2000000"
  "+ellps=GRS80"
  "+towgs84=0,0,0,0,0,0,0"
  "+units=m"
  "+no_defs"
  "+type=crs"
END

MapServer rehberinin tamamını okuyun →

EPSG:8059 projeksiyonunu Proj4js ile nasıl kullanırım?

Aşağıdaki tanımı Proj4js yapılandırma dosyanıza ekleyin:

proj4.defs("EPSG:8059", "+proj=lcc +lat_0=-32 +lon_0=135 +lat_1=-28 +lat_2=-36 +x_0=1000000 +y_0=2000000 +ellps=GRS80 +towgs84=0,0,0,0,0,0,0 +units=m +no_defs +type=crs");

Proj4js rehberinin tamamını okuyun →